The 8 outlet touch screen blind actuator are designed to control two way open close devices with the KNX system. These are a component of the Smarthome building system and have been designed to control devices like shades, sun curtains, shuttered curtains, etc.

You acquire a reliable and inexpensive KNX blind actuator with 8 outputs for the control of 4 rolling blinds.

Each output of the KNX blind actuator can switch up to 16a. Use this KNX blind actuator to control the rolling blinds in your smart home. We also carry KNX blind acuator for 4 rolling shutters. 

The outputs of the KNX blind actuator are parameterized as a group of two. 

As means that you will always use a pair to control the blind. With this KNX blind actuator you can control 4 blinds.

Thanks to the Touch control of the KNX shutter actuator, all channels can also be controlled in manual mode.

Should no KNX bus voltage be available by a KNX power supply, you can also control the connected shutters manually. A slight pressure on the front of the shutter actuator of the KNX shutter acuator is sufficient to switch the channel, provided you have configured the manual control of the KNX shutter acuator in the ETS. For the switching capacity of the outputs of the KNX shutter acuator please refer to the table in the properties.

Due to its compact design, the KNX shutter acuator only needs 4parts in electrical distribution.

The KNX shutter acuator is designed for DIN rail mounting and occupies considerably less space than comparable KNX shutter acuator with 16a switching capacity.

Control the switching outputs of the KNX shutter acuator with a KNX glass button or a INSPINIA touch panel with KNX. You can find different models in our webshop.